Cunap Wraps
Cunap Wraps
are a self contained delivery system for copper napthenate – the internationally
recognized wood preservative that fights the damaging effects of moisture,
decay and insect attack.
The Cunap
Wrap consists of
two tough wraps. One is a chemical, vapor and UV resistant envelope and
the other is a vapor barrier film backing. They encase a thick pad saturated
with a 2% copper napthenate solution in P9 oil.
Cunap Wrap's unique and patented design provides a long lasting
reservoir of protection. The preservative penetration is about 1" from
the surface. This external preservative system is often combined with
IMPEL Rods for internal preservative protection. The combination of IMPEL
Rods and Cunap Wraps provides most effective environmentally acceptable
treatment available for remedial treatment of wood in ground contact.
|
|
Recommended
Usage:
Cunap Wraps prevent and stop decay and insect attack at the groundline
of post, poles, pilings and timbers. |
All Cunap Wraps
are 18" wide to protect the vulnerable area 12" below the ground and 6"
above. There, you have the right combination of moisture and oxygen to cause
problems. To determine the Cunap Wrap length that is right for your wood
size, measure the circumference, and order the size that provides at least
1" of overlap. If you only know the diameter, multiply that times 3.14 to
get the circumference. A partial listing of sizes is below. Other standard
sizes and custom sizes are available.
|
