Replugs are the industry standard for Reusable Plastic Plugs for pole
maintenance. Unlike other plugs, the Scotty Replugs are
made from 100% pure virgin polymers, not recycled plastics. That makes them much stronger and truly
reusable as they will not warp, bend or
deform under use or removal. They can be
removed and reused over half a dozen times!
Replugs are used to seal inspection and treatment holes in wooden utility
poles, bridge timbers and anywhere that re-treatment and future inspection is
expected. Wood plugs have to be drilled
out, which increases the diameter of the hole so that a new replacement plug
does not provide a good enough seal.
They also eliminate the need to drill additional holes since existing
holes can be accessed by the removal and reuse of Scotty Replugs. They are especially useful when internal
fumigants are used as preservatives since they seal the fumigants in much
better because of the lack of a steep taper and a flexible thread design
allowing for much more contact area between the plug and the wood.
Replugs come in black, yellow or white for easy identification in places like
utility poles, bridges, fence lines, marinas or docks. While they are threaded, Replugs are designed
to be installed with a hammer blow. A
large slot screwdriver or star drill is used to remove them. Over 30 million Scotty Replugs are currently
in use throughout the World.
A-9 Replugs are used to seal 1/2" to 9/16” diameter holes.
A-11 Replugs are used to seal 11/16” holes.
A-13/14 Replugs are used to seal 13/16” to 7/8" holes.
Replug Removal tools (star drills) are also available.
exact specifications below.
The Price is for a single plug.
Replug Spec A9.pdf
Replug Spec A13/14.pdf
Replug Spec A11.pdf